Will a One-Bedroom Apartment Fit in a 10x10 Storage Unit?
A 10x10 can hold a boxed, disassembled one-bedroom apartment. Learn what fits, when to size up to a 10x15, and how to pack for Goldsboro drive-up units.
Quick Summary: A 10x10 can hold a one-bedroom apartment when most of the household is in boxes, the bed comes apart, and bulky pieces stack on edge. It is usually too tight if a king frame, sofa, and appliances stay assembled, or if you need a walkway to pull items later. The next size up is a 10x15, which is at both Goldsboro drive-up sites.
Will a One-Bedroom Apartment Fit in a 10x10 Storage Unit?
If you are packing a one-bedroom apartment in Goldsboro or elsewhere in Wayne County, start with the floor of the unit rather than the bedroom count. A 10x10 storage unit can hold those contents when furniture is disassembled and packed densely. It is often too tight for a fully furnished one-bedroom with oversized pieces still assembled.
Self Storage Goldsboro has 10x10 units at both drive-up facilities in town. Use those Goldsboro sizes when you decide whether a 10x10 is enough or whether you should take a 10x15.
Short Answer: When a 10x10 Works for a One-Bedroom
A 10x10 works when most of the apartment is in boxes, the bed frame comes apart, and bulky pieces are stacked on edge rather than left as they sat in the living room. The same unit gets tight if you roll in a fully assembled sofa, a king bed frame, a dresser, tables, and appliances. Those pieces still need floor space even if the apartment only had one bedroom.
Fit depends on inventory, not the lease’s room count:
- Two households leaving one-bedroom apartments can need different storage space if one already decluttered and the other is storing every furniture piece plus kitchen appliances.
- Dense packing without an aisle can work for temporary storage during a short gap between rentals.
- If you need a walkway so family can pull items on evenings and weekends, budget extra length and look at a 10x15.
Occupancy is high, so check online or call.
What Fits in a 10x10 Storage Unit
A 10x10 gives you about 100 square feet of floor. Height helps if you stack, but every dresser, mattress, and box still shares that footprint.
Treat the unit as a small room you will fill from the door inward. You will not recreate a bedroom layout inside it.
How much floor space you actually get
The footprint is 10 feet by 10 feet. Once a sofa or mattress goes in, the remaining floor shrinks quickly.
At Self Storage Goldsboro, standard units are ground-floor drive-up self storage with roll-up doors. Large pieces go in through the front of the unit.
That loading path matters when you move a couch or a mattress from a pickup. You pull up, open the door, and work straight into the storage space.
Furniture and household pieces that usually fit
A well-packed 10x10 can take a typical one-bedroom mix:
- A mattress, a sofa or couch, a dresser, and a couple of small tables
- Boxed household goods such as kitchenware, clothes, linens, and books, stacked in uniform boxes along the walls
- A king mattress as a maybe: stood on edge or angled through the door, the mattress itself can often go in
An assembled king frame with headboard, rails, and footboard eats floor that you still need for the rest of the apartment. A standard sofa usually fits if you stand it on end or slide it along a wall after other pieces are stacked. A bulky sectional or a sleeper sofa with the mattress still inside is much harder to place.
Leave appliances in the plan only if they are coming with you. A fridge or a washer and dryer can take a large share of a 10x10 once the furniture is already inside.
When a One-Bedroom Will Overflow a 10x10
Overflow usually comes from bulky furniture that stays assembled, appliances you are keeping, and the need to retrieve items later. If two of those three apply, a 10x10 is often too small.
Count the large pieces before you rent. A bed, a couch, a dresser, a dining table, and a few nightstands can fill the floor even before boxes go in.
If you are downsizing in Wayne County and still deciding what to keep, packing density is the variable you control. Furniture you refuse to take apart is what forces a larger unit.
A lighter move: boxes, bed, and a few pieces
Decluttering storage and a short gap between rentals are the cases where a 10x10 is enough. Most of the apartment is already in labeled boxes. You keep a bed, a dresser, and maybe one sitting piece.
That lighter inventory leaves room to stack boxes to a safe height and still close the door. It also matches people who have already sold or donated extra furniture.
If family will help load on a weeknight, keep the box count honest.
A fully furnished apartment with bulky furniture
If the sofa stays assembled, the king frame stays together, and a dining set plus multiple appliances come along, plan to size up. That load is how the apartment looked when you lived in it, and it rarely compresses into 100 square feet.
The next size for that situation is a 10x15 at both the US-117 and NC-111 facilities. The extra five feet of depth is usually enough for a sofa, appliances, and a narrow retrieval aisle.
Room count does not predict how much storage space the furniture will need. A fully furnished one-bedroom should be measured by the pieces, not by the lease.
10x10 vs 5x10 vs 10x15 for Apartment Contents
For apartment contents, the practical comparison in Goldsboro is 5x10, 10x10, and 10x15. All three storage unit sizes are at both facilities: 2052 US-117 and 389 NC-111.
| Size | Floor | When it works for a one-bedroom | Locations |
|---|---|---|---|
| 5x10 | About 50 square feet | Leftover boxes, a few pieces, or a studio-style overflow pile | US-117 and NC-111 |
| 10x10 | About 100 square feet | Boxed, disassembled, densely packed apartment | US-117 and NC-111 |
| 10x15 | Extra five feet of depth | Assembled sofa, appliances, and a retrieval aisle | US-117 and NC-111 |
A storage unit size guide helps if your inventory sits between two sizes. For a one-bedroom decision, start with whether the furniture is boxed and broken down, then pick among those three.
US-117 offers 5x10, 10x10, and 10x15 only. If you already know you need more length than a 10x15, the larger standard units are at NC-111.
Why a 5x10 is rarely enough for a full one-bedroom
A 5x10 is about 50 square feet of floor. That is closer to leftover boxes from a studio, a few furniture pieces, or a seasonal overflow pile than to a full one-bedroom apartment.
You might fit a mattress on edge, a small dresser, and a stack of boxes. You will not fit a couch, a bed, a dresser, tables, and household goods without leaving items behind.
If your one-bedroom is already mostly donated and you only need personal storage for boxes, a 5x10 can work. For a full apartment, treat the 5x10 as too small.
When a 10x15 is the safer choice
Choose a 10x15 when you want extra length for sofas, appliances, and a center aisle. That aisle is what lets you retrieve a tote without unloading the door stack first.
Both Goldsboro facilities have 10x15 units. If even a 10x15 looks short after you list every large piece, larger standard units (10x20, 15x15, and 10x30) are only at NC-111.
Name the location when you rent. A 10x20 or 10x30 is not an option on US-117, so do not plan a US-117 move around those sizes.
How to Pack a 10x10 So More of the Apartment Fits
Packing is often the difference between a 10x10 that closes and a 10x10 that does not. Disassembled furniture, stacked boxes of similar size, and a center walkway can make a one-bedroom fit when the same pieces left assembled would not.
Wrap furniture and cover mattresses so edges do not scuff. Use moving blankets or stretch wrap on wood and upholstery.
Label every box on more than one side. Evening and weekend helpers should read the label from the aisle without unloading the door.
Take furniture apart and stack with a walkway
- Break down beds, tables, and shelves before you leave the apartment.
- Store rails, slats, and table legs flat against a wall so the middle of the floor stays open.
- Stand mattresses on edge if they fit through the door and stay stable.
- Keep the bed hardware in a labeled bag taped to the frame so you are not hunting bolts later.
- Leave a center walkway even if it costs you a little stacking space, with labels facing that aisle.
Someone with 24/7/365 access can then find a box after work without a full unload.
Load from a vehicle at a ground-floor roll-up door
Ground-floor drive-up units with roll-up doors let you pull a vehicle to the door. There are no stairs and no lift, which matters when family is helping with a couch or a dresser.
That setup fits people who can only move in the evening or on weekends. You load, close the door, and leave.
- Keep the heaviest items toward the back.
- Place the pieces you may need first toward the door.
- Use a clear loading order while the truck or car sits a few feet from the roll-up door.
10x10 Units at the Goldsboro Drive-Up Facilities
Self Storage Goldsboro has 10x10 units at two Goldsboro locations:
- 2052 US-117, Goldsboro, NC 27530, (984) 985-2435
- 389 NC-111, Goldsboro, NC 27534, (984) 305-2292
Standard units are ground-floor drive-up with roll-up doors. Access is 24/7/365, leases are month-to-month, and you can rent and pay online.
Both sites serve Goldsboro and nearby Wayne County communities. Occupancy is high, so check online or call. For current rates, rent online.
Choose the Size That Matches This Move
A 10x10 storage unit is a reasonable match for a one-bedroom apartment that is boxed, disassembled, and packed without a lot of leftover bulk. Size up to a 10x15 at either location if the furniture stays assembled or you need a retrieval aisle.
If a 10x15 still looks short, look at the larger standard units at NC-111. Rent online or call for the size this move actually needs.
Month-to-month terms mean you can keep the unit through a slow downsize or a short gap between rentals without a long contract. Pick the footprint that matches the furniture list you actually have.
About the Author Self Storage Goldsboro operates two drive-up storage facilities in Wayne County, North Carolina, on US-117 and NC-111, serving Goldsboro, Mar-Mac, Mt Olive, Eureka, Fremont, Seven Springs and Seymour Johnson AFB.